By DailyDial, 23 October 2026
For most trade quotes, wait one to two days for small repairs, two to three days for mid-sized jobs like a boiler or bathroom, and three to five days for big projects like an extension, re-roof or rewire. Chase again after a few more days, then stop at a sensible point. The table below is a rule of thumb from how trade work tends to go, not researched statistics, so adjust it to your own customers.
The short answer
| Job type | First chase | Second chase | Stop or slow down |
|---|---|---|---|
| Small repair | 1 to 2 days | Day 5 | Stop at day 10 |
| Mid job (boiler, bathroom) | 2 to 3 days | Day 7 | Stop at day 14 |
| Big project (extension, re-roof, rewire) | 3 to 5 days | Day 10 | Day 21, then check in monthly |
The bigger the job, the longer the customer needs to think. A tap repair is decided in a day. A loft conversion involves a partner, a budget and often a few other quotes.
Timing by job size
Small repairs. The customer usually has a problem now. If they have not replied after a day or two, they have probably fixed it another way, or they are waiting for you to be more urgent. A quick text on day 1 or 2 is fine. A second on day 5 is plenty. If you have heard nothing by day 10, let it go.
Mid-sized jobs. A boiler swap or bathroom refit is a real spend, so people compare. Give it two to three days before the first message. Follow up around day 7 with something useful, such as your availability or a price held date. If there is still nothing at day 14, send a polite close-off message.
Big projects. An extension, re-roof or full rewire can take weeks of thinking. Chasing after three to five days is fine, because the quote may simply not have arrived. A second message around day 10 is enough. At day 21, send a last note, then check in about once a month if it is a job you really want. This extends the day-by-day list in Sales Follow-Up Tips for UK Tradespeople by job size.
Why quote validity dates help
Put an end date on every quote, for example “valid for 30 days”. It does two things. It gives the customer a reason to decide, and it gives you a natural, honest reason to get in touch: “Your quote runs out at the end of the month, so wanted to check if you’d like it extended.”
Only use a date you will stick to. Material prices and your diary do change, so a validity date is a fair thing to state, not a pressure tactic.
How many chases is too many?
Two or three messages is normal. A first check that it arrived, a second with something useful, and a final close-off message. More than that, and you start to look desperate or annoying.
For wording you can copy, see Quote Follow-Up Texts for Tradespeople. For timing and wording by trade, see How to Chase a Quote as an Electrician, Plumber or Builder.
When to stop chasing
Stop when you reach the end of the last column in the table, or when the customer tells you no. Send one friendly close-off message so the door stays open, then move on. A job that never replies after three messages usually will not, and your time is better spent on the next quote. Why Customers Don’t Call Back explains the common reasons.
Keep track so nothing slips
The real problem for most tradespeople is not the timing, it is remembering. You are up a ladder or under a sink when day 7 arrives. A simple list works, with the job, the date you sent the quote and the date of the next chase. See Tracking Quotes for how to do it in DailyDial, or for self-employed tradespeople for the wider picture. DailyDial is £1.99 a month with a 14-day free trial and no card needed.