How to Chase a Quote as an Electrician, Plumber or Builder | DailyDial

How to Chase a Quote as an Electrician, Plumber or Builder

By DailyDial, 23 October 2026

The right way to chase a quote depends on your trade. Emergency and small jobs need a quick message within a day or two, planned work like boiler swaps needs a few days, and big projects such as extensions, re-roofs and rewires need patience. Use the same three timings across all trades: a first chase after 1 to 5 days depending on job size, a second chase after 5 to 10 days, and a stop point between 10 and 21 days. The sections below adapt that for each trade.

The timings come from our guide to how long to wait before chasing a quote. They are a rule of thumb, not a researched statistic.

Job type First chase Second chase Stop or slow down
Small repair 1 to 2 days Day 5 Stop at day 10
Mid job (boiler, bathroom) 2 to 3 days Day 7 Stop at day 14
Big project (extension, re-roof, rewire) 3 to 5 days Day 10 Day 21, then monthly

How should electricians chase a quote?

Electrical work ranges from a quick socket fix to a whole-house rewire, so match the timing to the size.

Example: “Hi Sarah, did the rewire quote come through OK? If you have a date in mind for the work, I can check it against the diary.”

How should plumbers chase a quote?

Plumbing splits into urgent and planned work.

Example: “Hi Tom, the price on your boiler quote is held until the end of the month. Any questions, I’m happy to talk it through.”

How should builders chase a quote?

Extensions and conversions have long decision cycles. Customers may be waiting on planning permission, finance or a partner’s opinion.

For more on this trade see for builders, and for stalled customers, Customer Gone Quiet After Your Quote?

How should roofers chase a quote?

Re-roofs are big spends, and weather and scaffold bookings affect when work can start.

More on this trade is on the roofers page.

What if I am a one-person firm?

When you are on your own, the problem is time. You cannot message customers while you are up a ladder.

See for self-employed tradespeople for more, and for electricians and for plumbers for trade-specific pages.

One simple routine for every trade

  1. Send the quote with a clear end date, such as valid for 30 days.
  2. Write down the date and the next chase date, using the table above.
  3. First chase: check it arrived.
  4. Second chase: add something useful, like availability or a held price.
  5. Final message: a polite close-off, then stop.

That is three messages at most, then an occasional check-in on big jobs. If you find yourself worrying about sounding pushy, Customer Gone Quiet After Your Quote? covers it.

Never lose track of a quote

The hard part is remembering who to chase and when. DailyDial reminds you when each quote is due a chase, so nothing slips while you are on a job. It is £1.99 a month with a 14-day free trial and no card needed. See the pricing page.

Frequently Asked Questions

Often, yes. Domestic customers decide on gut feel and conversations at home, so a friendly text works well. Commercial customers may need approval from someone else, so ask who makes the decision and when they expect to decide.
Ask if they have a date they need the work done by. It keeps the follow-up practical and gives them a reason to reply. Agents are busy, so keep it to one line and send it by email or text, whichever they used.
Do not try. Batch your chases into one slot a day. A reminder that tells you which quotes are due makes this quicker. DailyDial does that for £1.99 a month, with a 14-day free trial and no card needed.
Chat with DailyDial
Talk to a person instead →
Start your free 14-day trial →